ST-2W is a load cell, manufactured in S-type, special alloy steel and nickel plated, which runs in the direction of push with the principle of shear beam, in order to increase its strength against industrial conditions and corrosion.  Its version, which runs in the direction of pull with 10 tons capacity, is optional. Load cell is primarily designed for using in truck scales. It is resistant to overload and abaxial loads. It is also appropriate to used for silo and tank weighing and material test machines. ST-2W Series Load Cell is manufactured in 10, 20 ton capacities.

	Type	ST-2W
	Accuracy class	C3  OIML R60 // C4 OIML R60
	Capacity (Emax)	10 , 20 T
	Minimum dead load	0 %R.O
	Rated output R.O	2,0 mV/V
	Maximum number of load cell interval nmax	3000 // 4000
	Vmin	Emax/10000  //  Emax/10000
	Emax/Vmin	10000  //  10000
	Minimum dead load output return(MDLOR)	<0,0167  //  <0,0125    %R.O
	Zero balance	1 %R.O
	Temperature effect on zero	< 0,0070  //  < 0,0070    %R.O/5°C
	Temperature effect on output	< 0,0055  //  < 0,0045    %R.O/5°C
	Compensated temperature range	-10 /+40 °C
	Temperature range,safe	-30 /+70 °C
	Maximum safe central overload	150 %R.O
	Ultimate central overload	300 %R.O
	Excitation	5 V
	Input empedance	380±20  Ω
	Output empedance	350±3 Ω
	Insulation resistance	>1000 MΩ
	Conctruction	nickel plated alloy steel
	Environmental protection	IP67
	Cable type	4x0,22 mm
	Cable length	15 m

ST-2W Series Load Cell Techical Drawing

ST-2W Series Load Cell Catalog