HT - 5 C is a load cell, manufactured in special alloy steel and nickel-plated, which runs in the direction of push or both push and pull with the principle of shear beam, in order to increase its strength against industrial conditions and corrosion. HT load cell’s resistance to abaxial loads is perfect. It is ideal for silo and tank applications, which is subject to abaxial lateral loads caused by the wind in outer environment. Since its height is lower than column type load cells, it is preferred in such applications. The type with self-spherical pin for the application in push direction and the type, in which metric screw is attached to it, for the application in pull or both push and pull direction, are available. It is produced in 2, 5, 10, 30 ton capacities. Tank and silo weighing, material test machine, weighing platforms and force measurement are its application areas.

	Type	HT
	Accuracy Class	D
	Capacity (Emax)	2, 5, 10, 30 T
	Minimum dead load	0 %R.O
	Rated Output R.O	2,0 mV/V
	Maximum number of load cell interval n max	1000
	Vmin	Emax / 4000
	Emax / Vmin	4000
	Combined error	0,030 %R.O
	Minimum dead load output return(MDLOR)	<0,0500 %R.O
	Zero balance	1 %R.O
	Temperature effect on zero	< 0,014 %R.O/5C
	Temperature effect on output	< 0,010 %R.O/5°C
	Compensated temperature range	-10 /+40 °C
	Temperature range, safe	-30 /+70 °C
	Maximum safe central overload	150 %R.O
	Ultimate central overload	300 %R.O
	Excitation	5 V
	Input empedance	760±20 // 380±20 Ω
	Output empedance	700±3 // 350±3 Ω
	Insulation Resistance	>1000 MΩ
	Conctruction	nickel plated alloy steel
	Environmental Protection	IP67
	Cable Type	4x0,22 mm
	Cable Length	2T, 5T - 3 m // 10T, 30T - 15 m

HT Series Technical Drawing

HT Series Load Cell Catalog